Global Fastening Customization Solutions Supplier

Facebook twiter LinkedIn Instagram YouTube Pinterest
English
pahina_banner

Hex head bolts

Hex head bolts

Ang mga hex bolts, na kilala rin bilang hexagon head bolts o hex cap screws, ay isang pangkaraniwang uri ng fastener na may isang hexagonal head at panlabas na sinulid na baras. Ang mga hex bolts ay graded batay sa kanilang materyal na lakas. Kasama sa mga karaniwang materyales ang SS201, SS304, at SS316 para sa mga hindi kinakalawang na asero na bolts, ang bawat isa ay may mga tiyak na katangian ng mekanikal.

  • Hindi kinakalawang na asero mabibigat na hex bolts din 6914

    Hindi kinakalawang na asero mabibigat na hex bolts din 6914DetalyeTalahanayan ng sukat

    Laki ng nominal o pangunahing diameter ng produkto Buong laki ng diameter ng katawan, e (tingnan ang paras. 3.4 at 3.5) Lapad sa buong flat, f (tingnan ang para. 2.1.2) Lapad sa buong sulok, g Taas ng ulo, h Radius ng fillet, r Haba ng Nominal Thread Para sa Mga Haba ng Bolt, LT (tingnan ang para. 3.7)
    Max. Min. Pangunahing Mаx. Min. Max. Min. Pangunahing Max. Min. Max. Min. 6 in at mas maikli Higit sa 6 in.
    1/4 0.2500 0.260 0.237 7/16 0.438 0.425 0.505 0.484 11/64 0.188 0.150 0.03 0.01 0.750 1.000
    5/16 0.3125 0.324 0.298 1/2 0.500 0.484 0.577 0.552 7/32 0.195 0.03 0.01 0.875 1.125
    3/8 0.3750 0.388 0.360 9/16 0.562 0.544 0.650 0.620 1/4 0.268 0.226 0.03 0.01 1.000 1.250
    7/16 0.4375 0.452 5/8 0.625 0.603 0.722 0.316 0.03 0.01 1.125
    1/2 0.5000 0.515 0.482 3/4 0.750 0.725 0.866 0.826 11/32 0.364 0.302 0.03 0.01 1.250 1.500
    5/8 0.6250 0.642 0.605 15/16 0.938 0.906 1.083 1.033 27/64 0.444 0.378 0.03 0.02 1.500 1.750
    3/4 0.7500 0.768 0.729 1-1/8 1.125 1.088 1.299 1.240 1/2 0.524 0.455 0.06 0.02 1.750 2.000
    7/8 0.8750 0.895 0.852 1-5/16 1.312 1.269 1.516 1.447 37/64 0.604 0.531 0.06 0.02 2.000 2.250
    1 1.0000 1.022 0.976 1/1/2 1.500 1.450 1.732 1.653 43/64 0.700 0.591 0.06 0.03 2.250 2.500
    1-1/8 1.1250 1.149 1.098 1-11/16 1.688 1.631 1.949 1.859 3/4 0.780 0.658 0.09 0.03 2.500 2.750
    1-1/4 1.2500 1.277 1.223 1-7/8 1.875 1.812 2.165 2.066 27/32 0.876 0.749 0.09 0.03 2.750 3.000
    1-3/8 1.3750 1.404 1.345 2-1/16 2.062 1.994 2.382 2.273 29/32 0.940 0.810 0.09 0.03 3.000 3.250
    1-1/2 1.5000 1.531 1.470 2-1/4 2.250 2.175 2.598 2.480 1 1.036 0.902 0.09 0.03 3.250 3.500
    1-5/8 1.6250 1.685 1.591 2-7/16 2.438 2.356 2.815 2.616 1-3/32 1.116 0.978 0.09 0.03 3.500 3.750
    1-3/4 1.7500 1.785 1.716 2-5/8 2.625 2.538 3.031 2.893 1-5/32 1.196 1.054 0.12 0.04 3.750 4.000
    1-7/8 1.8750 1.912 1.839 2-13/16 2.812 2.719 3.248 3.099 1-1/4 1.276 1.130 0.12 0.04 4.000 4.250
    2 2.0000 2.039 1.964 3 3.000 2.900 3.464 3.306 1-11/32 1.388 1.175 0.12 0.04 4.250 4.500
    2-1/4 2.2500 2.305 2.214 3-3/8 3.375 3.262 3.897 3.719 1-1/2 1.548 1.327 0.19 0.06 4.750 5.000
    2-1/2 2.5000 2.559 2.461 3-3/4 3.750 3.625 4.330 4.133 1-21/32 1.708 1.479 0.19 0.06 5.250 5.500
    2-3/4 2.7500 2.827 2.711 4-1/8 4.125 3.988 4.763 4.546 1-13/16 1.869 1.632 0.19 0.06 5.750 6.000
    3 3.0000 3.081 2.961 4-1/2 4.500 4.350 5.196 4.959 2 2.060 1.815 0.19 0.06 6.250 6.500
    3-1/4 3.2500 3.335 3.210 4-7/8 4.875 4.712 5.629 5.372 2-3/16 2.251 1.936 0.19 0.06 6.750 7.000
    3-1/2 3.5000 3.589 3.461 5-1/4 5.250 5.075 6.062 5.786 2-5/16 2.380 2.057 0.19 0.06 7.250 7.500
    3-3/4 3.7500 3.858 3.726 5-5/8 5.625 5.437 6.495 6.198 2-1/2 2.572 2.241 0.19 0.06 7.750 8.000
    4 4.0000 4.111 3.975 6 6.000 5.800 6.928 6.612 2-11/16 2.764 2.424 0.19 0.06 8.250 8.500
  • A2-70 hindi kinakalawang na asero hex head bolts din 601

    A2-70 hindi kinakalawang na asero hex head bolts din 601DetalyeTalahanayan ng sukat

    Ang AYA Fasteners 'A2-70 hindi kinakalawang na asero hex head bolts ay mga high-performance fastener na idinisenyo para sa isang malawak na hanay ng mga pang-industriya na aplikasyon. Ginawa mula sa A2-70 grade hindi kinakalawang na asero, ang mga bolts na ito ay nagbibigay ng mataas na lakas at paglaban ng kaagnasan para sa mga pang-industriya na aplikasyon. Ang pagtatalaga ng A2-70 ay nagpapahiwatig ng isang minimum na lakas ng makunat na 700 MPa, na ginagawang angkop ang mga bolts na ito para sa daluyan hanggang sa mga aplikasyon ng high-stress.

    Laki ng nominal o pangunahing diameter ng produkto Buong laki ng diameter ng katawan, e (tingnan ang paras. 3.4 at 3.5) Lapad sa buong flat, f (tingnan ang para. 2.1.2) Lapad sa buong sulok, g Taas ng ulo, h Radius ng fillet, r Haba ng Nominal Thread Para sa Mga Haba ng Bolt, LT (tingnan ang para. 3.7)
    Max. Min. Pangunahing Mаx. Min. Max. Min. Pangunahing Max. Min. Max. Min. 6 in at mas maikli Higit sa 6 in.
    1/4 0.2500 0.260 0.237 7/16 0.438 0.425 0.505 0.484 11/64 0.188 0.150 0.03 0.01 0.750 1.000
    5/16 0.3125 0.324 0.298 1/2 0.500 0.484 0.577 0.552 7/32 0.195 0.03 0.01 0.875 1.125
    3/8 0.3750 0.388 0.360 9/16 0.562 0.544 0.650 0.620 1/4 0.268 0.226 0.03 0.01 1.000 1.250
    7/16 0.4375 0.452 5/8 0.625 0.603 0.722 0.316 0.03 0.01 1.125
    1/2 0.5000 0.515 0.482 3/4 0.750 0.725 0.866 0.826 11/32 0.364 0.302 0.03 0.01 1.250 1.500
    5/8 0.6250 0.642 0.605 15/16 0.938 0.906 1.083 1.033 27/64 0.444 0.378 0.03 0.02 1.500 1.750
    3/4 0.7500 0.768 0.729 1-1/8 1.125 1.088 1.299 1.240 1/2 0.524 0.455 0.06 0.02 1.750 2.000
    7/8 0.8750 0.895 0.852 1-5/16 1.312 1.269 1.516 1.447 37/64 0.604 0.531 0.06 0.02 2.000 2.250
    1 1.0000 1.022 0.976 1/1/2 1.500 1.450 1.732 1.653 43/64 0.700 0.591 0.06 0.03 2.250 2.500
    1-1/8 1.1250 1.149 1.098 1-11/16 1.688 1.631 1.949 1.859 3/4 0.780 0.658 0.09 0.03 2.500 2.750
    1-1/4 1.2500 1.277 1.223 1-7/8 1.875 1.812 2.165 2.066 27/32 0.876 0.749 0.09 0.03 2.750 3.000
    1-3/8 1.3750 1.404 1.345 2-1/16 2.062 1.994 2.382 2.273 29/32 0.940 0.810 0.09 0.03 3.000 3.250
    1-1/2 1.5000 1.531 1.470 2-1/4 2.250 2.175 2.598 2.480 1 1.036 0.902 0.09 0.03 3.250 3.500
    1-5/8 1.6250 1.685 1.591 2-7/16 2.438 2.356 2.815 2.616 1-3/32 1.116 0.978 0.09 0.03 3.500 3.750
    1-3/4 1.7500 1.785 1.716 2-5/8 2.625 2.538 3.031 2.893 1-5/32 1.196 1.054 0.12 0.04 3.750 4.000
    1-7/8 1.8750 1.912 1.839 2-13/16 2.812 2.719 3.248 3.099 1-1/4 1.276 1.130 0.12 0.04 4.000 4.250
    2 2.0000 2.039 1.964 3 3.000 2.900 3.464 3.306 1-11/32 1.388 1.175 0.12 0.04 4.250 4.500
    2-1/4 2.2500 2.305 2.214 3-3/8 3.375 3.262 3.897 3.719 1-1/2 1.548 1.327 0.19 0.06 4.750 5.000
    2-1/2 2.5000 2.559 2.461 3-3/4 3.750 3.625 4.330 4.133 1-21/32 1.708 1.479 0.19 0.06 5.250 5.500
    2-3/4 2.7500 2.827 2.711 4-1/8 4.125 3.988 4.763 4.546 1-13/16 1.869 1.632 0.19 0.06 5.750 6.000
    3 3.0000 3.081 2.961 4-1/2 4.500 4.350 5.196 4.959 2 2.060 1.815 0.19 0.06 6.250 6.500
    3-1/4 3.2500 3.335 3.210 4-7/8 4.875 4.712 5.629 5.372 2-3/16 2.251 1.936 0.19 0.06 6.750 7.000
    3-1/2 3.5000 3.589 3.461 5-1/4 5.250 5.075 6.062 5.786 2-5/16 2.380 2.057 0.19 0.06 7.250 7.500
    3-3/4 3.7500 3.858 3.726 5-5/8 5.625 5.437 6.495 6.198 2-1/2 2.572 2.241 0.19 0.06 7.750 8.000
    4 4.0000 4.111 3.975 6 6.000 5.800 6.928 6.612 2-11/16 2.764 2.424 0.19 0.06 8.250 8.500
  • 316 hindi kinakalawang na asero hex head bolts din 931

    316 hindi kinakalawang na asero hex head bolts din 931DetalyeTalahanayan ng sukat

    Ang Aya Fasteners '316 hindi kinakalawang na asero hex bolts ay inhinyero para sa matinding mga kapaligiran, na nag -aalok ng pambihirang paglaban sa kaagnasan at tibay. Made from 316 stainless steel, these bolts are well-known for their exceptional corrosion resistance, particularly against chlorides and acidic substances. Ginagawa nitong isang mainam na pagpipilian para sa mga industriya kung saan ang pagkakalantad sa malupit na mga kemikal, tubig -alat, o matinding kondisyon ng panahon ay pangkaraniwan. Tinitiyak ng Hex Head Design ang madaling pag -install at pag -alis, na nagbibigay ng isang ligtas at maaasahang koneksyon para sa mga kritikal na aplikasyon.

    Laki ng nominal o pangunahing diameter ng produkto Buong laki ng diameter ng katawan, e (tingnan ang paras. 3.4 at 3.5) Lapad sa buong flat, f (tingnan ang para. 2.1.2) Lapad sa buong sulok, g Taas ng ulo, h Radius ng fillet, r Haba ng Nominal Thread Para sa Mga Haba ng Bolt, LT (tingnan ang para. 3.7)
    Max. Min. Pangunahing Mаx. Min. Max. Min. Pangunahing Max. Min. Max. Min. 6 in at mas maikli Higit sa 6 in.
    1/4 0.2500 0.260 0.237 7/16 0.438 0.425 0.505 0.484 11/64 0.188 0.150 0.03 0.01 0.750 1.000
    5/16 0.3125 0.324 0.298 1/2 0.500 0.484 0.577 0.552 7/32 0.195 0.03 0.01 0.875 1.125
    3/8 0.3750 0.388 0.360 9/16 0.562 0.544 0.650 0.620 1/4 0.268 0.226 0.03 0.01 1.000 1.250
    7/16 0.4375 0.452 5/8 0.625 0.603 0.722 0.316 0.03 0.01 1.125
    1/2 0.5000 0.515 0.482 3/4 0.750 0.725 0.866 0.826 11/32 0.364 0.302 0.03 0.01 1.250 1.500
    5/8 0.6250 0.642 0.605 15/16 0.938 0.906 1.083 1.033 27/64 0.444 0.378 0.03 0.02 1.500 1.750
    3/4 0.7500 0.768 0.729 1-1/8 1.125 1.088 1.299 1.240 1/2 0.524 0.455 0.06 0.02 1.750 2.000
    7/8 0.8750 0.895 0.852 1-5/16 1.312 1.269 1.516 1.447 37/64 0.604 0.531 0.06 0.02 2.000 2.250
    1 1.0000 1.022 0.976 1/1/2 1.500 1.450 1.732 1.653 43/64 0.700 0.591 0.06 0.03 2.250 2.500
    1-1/8 1.1250 1.149 1.098 1-11/16 1.688 1.631 1.949 1.859 3/4 0.780 0.658 0.09 0.03 2.500 2.750
    1-1/4 1.2500 1.277 1.223 1-7/8 1.875 1.812 2.165 2.066 27/32 0.876 0.749 0.09 0.03 2.750 3.000
    1-3/8 1.3750 1.404 1.345 2-1/16 2.062 1.994 2.382 2.273 29/32 0.940 0.810 0.09 0.03 3.000 3.250
    1-1/2 1.5000 1.531 1.470 2-1/4 2.250 2.175 2.598 2.480 1 1.036 0.902 0.09 0.03 3.250 3.500
    1-5/8 1.6250 1.685 1.591 2-7/16 2.438 2.356 2.815 2.616 1-3/32 1.116 0.978 0.09 0.03 3.500 3.750
    1-3/4 1.7500 1.785 1.716 2-5/8 2.625 2.538 3.031 2.893 1-5/32 1.196 1.054 0.12 0.04 3.750 4.000
    1-7/8 1.8750 1.912 1.839 2-13/16 2.812 2.719 3.248 3.099 1-1/4 1.276 1.130 0.12 0.04 4.000 4.250
    2 2.0000 2.039 1.964 3 3.000 2.900 3.464 3.306 1-11/32 1.388 1.175 0.12 0.04 4.250 4.500
    2-1/4 2.2500 2.305 2.214 3-3/8 3.375 3.262 3.897 3.719 1-1/2 1.548 1.327 0.19 0.06 4.750 5.000
    2-1/2 2.5000 2.559 2.461 3-3/4 3.750 3.625 4.330 4.133 1-21/32 1.708 1.479 0.19 0.06 5.250 5.500
    2-3/4 2.7500 2.827 2.711 4-1/8 4.125 3.988 4.763 4.546 1-13/16 1.869 1.632 0.19 0.06 5.750 6.000
    3 3.0000 3.081 2.961 4-1/2 4.500 4.350 5.196 4.959 2 2.060 1.815 0.19 0.06 6.250 6.500
    3-1/4 3.2500 3.335 3.210 4-7/8 4.875 4.712 5.629 5.372 2-3/16 2.251 1.936 0.19 0.06 6.750 7.000
    3-1/2 3.5000 3.589 3.461 5-1/4 5.250 5.075 6.062 5.786 2-5/16 2.380 2.057 0.19 0.06 7.250 7.500
    3-3/4 3.7500 3.858 3.726 5-5/8 5.625 5.437 6.495 6.198 2-1/2 2.572 2.241 0.19 0.06 7.750 8.000
    4 4.0000 4.111 3.975 6 6.000 5.800 6.928 6.612 2-11/16 2.764 2.424 0.19 0.06 8.250 8.500
  • Hindi kinakalawang na asero hex bolts

    Hindi kinakalawang na asero hex boltsDetalyeTalahanayan ng sukat

    Ang hindi kinakalawang na asero hex head bolts ay isang uri ng fastener na may isang hexagonal head na idinisenyo upang masikip o maluwag gamit ang isang wrench o socket. Ang mga ito ay ginawa mula sa hindi kinakalawang na asero, na nag -aalok ng paglaban sa kaagnasan, na ginagawang angkop para sa iba't ibang mga aplikasyon sa iba't ibang mga industriya. Magagamit sa iba't ibang laki, haba, at mga pitches ng thread upang umangkop sa iba't ibang mga aplikasyon at pagtutukoy.

    Laki ng nominal o pangunahing diameter ng produkto Buong laki ng diameter ng katawan, e (tingnan ang paras. 3.4 at 3.5) Lapad sa buong flat, f (tingnan ang para. 2.1.2) Lapad sa buong sulok, g Taas ng ulo, h Radius ng fillet, r Haba ng Nominal Thread Para sa Mga Haba ng Bolt, LT (tingnan ang para. 3.7)
    Max. Min. Pangunahing Mаx. Min. Max. Min. Pangunahing Max. Min. Max. Min. 6 in at mas maikli Higit sa 6 in.
    1/4 0.2500 0.260 0.237 7/16 0.438 0.425 0.505 0.484 11/64 0.188 0.150 0.03 0.01 0.750 1.000
    5/16 0.3125 0.324 0.298 1/2 0.500 0.484 0.577 0.552 7/32 0.195 0.03 0.01 0.875 1.125
    3/8 0.3750 0.388 0.360 9/16 0.562 0.544 0.650 0.620 1/4 0.268 0.226 0.03 0.01 1.000 1.250
    7/16 0.4375 0.452 5/8 0.625 0.603 0.722 0.316 0.03 0.01 1.125
    1/2 0.5000 0.515 0.482 3/4 0.750 0.725 0.866 0.826 11/32 0.364 0.302 0.03 0.01 1.250 1.500
    5/8 0.6250 0.642 0.605 15/16 0.938 0.906 1.083 1.033 27/64 0.444 0.378 0.03 0.02 1.500 1.750
    3/4 0.7500 0.768 0.729 1-1/8 1.125 1.088 1.299 1.240 1/2 0.524 0.455 0.06 0.02 1.750 2.000
    7/8 0.8750 0.895 0.852 1-5/16 1.312 1.269 1.516 1.447 37/64 0.604 0.531 0.06 0.02 2.000 2.250
    1 1.0000 1.022 0.976 1/1/2 1.500 1.450 1.732 1.653 43/64 0.700 0.591 0.06 0.03 2.250 2.500
    1-1/8 1.1250 1.149 1.098 1-11/16 1.688 1.631 1.949 1.859 3/4 0.780 0.658 0.09 0.03 2.500 2.750
    1-1/4 1.2500 1.277 1.223 1-7/8 1.875 1.812 2.165 2.066 27/32 0.876 0.749 0.09 0.03 2.750 3.000
    1-3/8 1.3750 1.404 1.345 2-1/16 2.062 1.994 2.382 2.273 29/32 0.940 0.810 0.09 0.03 3.000 3.250
    1-1/2 1.5000 1.531 1.470 2-1/4 2.250 2.175 2.598 2.480 1 1.036 0.902 0.09 0.03 3.250 3.500
    1-5/8 1.6250 1.685 1.591 2-7/16 2.438 2.356 2.815 2.616 1-3/32 1.116 0.978 0.09 0.03 3.500 3.750
    1-3/4 1.7500 1.785 1.716 2-5/8 2.625 2.538 3.031 2.893 1-5/32 1.196 1.054 0.12 0.04 3.750 4.000
    1-7/8 1.8750 1.912 1.839 2-13/16 2.812 2.719 3.248 3.099 1-1/4 1.276 1.130 0.12 0.04 4.000 4.250
    2 2.0000 2.039 1.964 3 3.000 2.900 3.464 3.306 1-11/32 1.388 1.175 0.12 0.04 4.250 4.500
    2-1/4 2.2500 2.305 2.214 3-3/8 3.375 3.262 3.897 3.719 1-1/2 1.548 1.327 0.19 0.06 4.750 5.000
    2-1/2 2.5000 2.559 2.461 3-3/4 3.750 3.625 4.330 4.133 1-21/32 1.708 1.479 0.19 0.06 5.250 5.500
    2-3/4 2.7500 2.827 2.711 4-1/8 4.125 3.988 4.763 4.546 1-13/16 1.869 1.632 0.19 0.06 5.750 6.000
    3 3.0000 3.081 2.961 4-1/2 4.500 4.350 5.196 4.959 2 2.060 1.815 0.19 0.06 6.250 6.500
    3-1/4 3.2500 3.335 3.210 4-7/8 4.875 4.712 5.629 5.372 2-3/16 2.251 1.936 0.19 0.06 6.750 7.000
    3-1/2 3.5000 3.589 3.461 5-1/4 5.250 5.075 6.062 5.786 2-5/16 2.380 2.057 0.19 0.06 7.250 7.500
    3-3/4 3.7500 3.858 3.726 5-5/8 5.625 5.437 6.495 6.198 2-1/2 2.572 2.241 0.19 0.06 7.750 8.000
    4 4.0000 4.111 3.975 6 6.000 5.800 6.928 6.612 2-11/16 2.764 2.424 0.19 0.06 8.250 8.500
  • Hindi kinakalawang na asero hex head bolts

    Hindi kinakalawang na asero hex head boltsDetalyeTalahanayan ng sukat

    Ang hindi kinakalawang na asero hex head bolts ay isang uri ng fastener na may isang hexagonal head na idinisenyo upang masikip o maluwag gamit ang isang wrench o socket. Ang mga ito ay ginawa mula sa hindi kinakalawang na asero, na nag -aalok ng paglaban sa kaagnasan, na ginagawang angkop para sa iba't ibang mga aplikasyon sa iba't ibang mga industriya. Magagamit sa iba't ibang laki, haba, at mga pitches ng thread upang umangkop sa iba't ibang mga aplikasyon at pagtutukoy.

    Screw thread M1.6 M2 M2.5 M3 (M3.5) M4 M5 M6 (M7) M8 M10 M12 (M14) M16
    d
    P Pitch 0.35 0.4 0.45 0.5 0.6 0.7 0.8 1 1 1.25 1.5 1.75 2 2
    a Max 1.05 1.2 1.35 1.5 1.8 2.1 2.4 3 3 3.75 4.5 5.25 6 6
    c min 0.1 0.1 0.1 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2
    Max 0.25 0.25 0.25 0.4 0.4 0.4 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.8
    da Max 2 2.6 3.1 3.6 4.1 4.7 5.7 6.8 7.8 9.2 11.2 13.7 15.7 17.7
    dw Baitang A. min 2.4 3.2 4.1 4.6 5.1 5.9 6.9 8.9 9.6 11.6 15.6 17.4 20.5 22.5
    Baitang b min - - - - - 5.7 6.7 8.7 9.4 11.4 15.4 17.2 20.1 22
    e Baitang A. min 3.41 4.32 5.45 6.01 6.58 7.66 8.79 11.05 12.12 14.38 18.9 21.1 24.49 26.75
    Baitang b min - - - - - 7.5 8.63 10.89 11.94 14.2 18.72 20.88 23.91 26.17
    k Laki ng nominal 1.1 1.4 1.7 2 2.4 2.8 3.5 4 4.8 5.3 6.4 7.5 8.8 10
    Baitang A. min 0.98 1.28 1.58 1.88 2.28 2.68 3.35 3.85 4.65 5.15 6.22 7.32 8.62 9.82
    Max 1.22 1.52 1.82 2.12 2.52 2.92 3.65 4.15 4.95 5.45 6.56 7.68 8.98 10.18
    Baitang b min - - - - - 2.6 3.26 3.76 4.56 5.06 6.11 7.21 8.51 9.71
    Max - - - - - 3 3.74 4.24 5.54 6.69 7.79 9.09 10.29
    k1 min 0.7 0.9 1.1 1.3 1.6 1.9 2.28 2.63 3.19 3.54 4.28 5.05 5.96 6.8
    r min 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.25 0.25 0.4 0.4 0.6 0.6 0.6
    s Max = laki ng nominal 3.2 4 5 5.5 6 7 8 10 11 13 17 19 22 24
    Baitang A. min 3.02 3.82 4.82 5.32 5.82 6.78 7.78 9.78 12.73 16.73 18.67 21.67 23.67
    Baitang b min - - - - - 6.64 7.64 9.64 10.57 12.57 16.57 18.48 21.16 23.16
  • ASME B18.2.1 Hindi kinakalawang na asero hex bolts

    ASME B18.2.1 Hindi kinakalawang na asero hex boltsDetalyeTalahanayan ng sukat


    Ito ay lumalaban sa kalawang at oksihenasyon, na ginagawang isang tanyag na pagpipilian para sa mga aplikasyon kung saan ang pagkakalantad sa kahalumigmigan at malupit na mga kondisyon ay isang pag -aalala.

    Laki ng nominal o pangunahing diameter ng produkto Buong laki ng diameter ng katawan, e (tingnan ang paras. 3.4 at 3.5) Lapad sa buong flat, f (tingnan ang para. 2.1.2) Lapad sa buong sulok, g Taas ng ulo, h Radius ng fillet, r Haba ng Nominal Thread Para sa Mga Haba ng Bolt, LT (tingnan ang para. 3.7)
    Max. Min. Pangunahing Mаx. Min. Max. Min. Pangunahing Max. Min. Max. Min. 6 in at mas maikli Higit sa 6 in.
    1/4 0.2500 0.260 0.237 7/16 0.438 0.425 0.505 0.484 11/64 0.188 0.150 0.03 0.01 0.750 1.000
    5/16 0.3125 0.324 0.298 1/2 0.500 0.484 0.577 0.552 7/32 0.195 0.03 0.01 0.875 1.125
    3/8 0.3750 0.388 0.360 9/16 0.562 0.544 0.650 0.620 1/4 0.268 0.226 0.03 0.01 1.000 1.250
    7/16 0.4375 0.452 5/8 0.625 0.603 0.722 0.316 0.03 0.01 1.125
    1/2 0.5000 0.515 0.482 3/4 0.750 0.725 0.866 0.826 11/32 0.364 0.302 0.03 0.01 1.250 1.500
    5/8 0.6250 0.642 0.605 15/16 0.938 0.906 1.083 1.033 27/64 0.444 0.378 0.03 0.02 1.500 1.750
    3/4 0.7500 0.768 0.729 1-1/8 1.125 1.088 1.299 1.240 1/2 0.524 0.455 0.06 0.02 1.750 2.000
    7/8 0.8750 0.895 0.852 1-5/16 1.312 1.269 1.516 1.447 37/64 0.604 0.531 0.06 0.02 2.000 2.250
    1 1.0000 1.022 0.976 1/1/2 1.500 1.450 1.732 1.653 43/64 0.700 0.591 0.06 0.03 2.250 2.500
    1-1/8 1.1250 1.149 1.098 1-11/16 1.688 1.631 1.949 1.859 3/4 0.780 0.658 0.09 0.03 2.500 2.750
    1-1/4 1.2500 1.277 1.223 1-7/8 1.875 1.812 2.165 2.066 27/32 0.876 0.749 0.09 0.03 2.750 3.000
    1-3/8 1.3750 1.404 1.345 2-1/16 2.062 1.994 2.382 2.273 29/32 0.940 0.810 0.09 0.03 3.000 3.250
    1-1/2 1.5000 1.531 1.470 2-1/4 2.250 2.175 2.598 2.480 1 1.036 0.902 0.09 0.03 3.250 3.500
    1-5/8 1.6250 1.685 1.591 2-7/16 2.438 2.356 2.815 2.616 1-3/32 1.116 0.978 0.09 0.03 3.500 3.750
    1-3/4 1.7500 1.785 1.716 2-5/8 2.625 2.538 3.031 2.893 1-5/32 1.196 1.054 0.12 0.04 3.750 4.000
    1-7/8 1.8750 1.912 1.839 2-13/16 2.812 2.719 3.248 3.099 1-1/4 1.276 1.130 0.12 0.04 4.000 4.250
    2 2.0000 2.039 1.964 3 3.000 2.900 3.464 3.306 1-11/32 1.388 1.175 0.12 0.04 4.250 4.500
    2-1/4 2.2500 2.305 2.214 3-3/8 3.375 3.262 3.897 3.719 1-1/2 1.548 1.327 0.19 0.06 4.750 5.000
    2-1/2 2.5000 2.559 2.461 3-3/4 3.750 3.625 4.330 4.133 1-21/32 1.708 1.479 0.19 0.06 5.250 5.500
    2-3/4 2.7500 2.827 2.711 4-1/8 4.125 3.988 4.763 4.546 1-13/16 1.869 1.632 0.19 0.06 5.750 6.000
    3 3.0000 3.081 2.961 4-1/2 4.500 4.350 5.196 4.959 2 2.060 1.815 0.19 0.06 6.250 6.500
    3-1/4 3.2500 3.335 3.210 4-7/8 4.875 4.712 5.629 5.372 2-3/16 2.251 1.936 0.19 0.06 6.750 7.000
    3-1/2 3.5000 3.589 3.461 5-1/4 5.250 5.075 6.062 5.786 2-5/16 2.380 2.057 0.19 0.06 7.250 7.500
    3-3/4 3.7500 3.858 3.726 5-5/8 5.625 5.437 6.495 6.198 2-1/2 2.572 2.241 0.19 0.06 7.750 8.000
    4 4.0000 4.111 3.975 6 6.000 5.800 6.928 6.612 2-11/16 2.764 2.424 0.19 0.06 8.250 8.500
Pindutin ang Enter upang maghanap o mag -esc upang isara